The MIC2954 is a "bulletproof" efficient voltage regulator with very low dropout voltage (typically 40mV at light loads and 375mV at 250mA), and low quiescent current (120mA typical).The quiescent current of the MIC2954 increases only slightly in dropout, thus prolonging battery life. Key MIC2954 features include protection against reversed battery, foldback current limiting, and automotive load dump protection (60V positive transient).
The MIC2954-07/08BM is an adjustable version that includes an error flag output that warns of a low output voltage, which is often due to failing batteries on the input. This may also be used as a power-on reset. A logic-compatible shutdown input is provided which enables the regulator to be switched on and
off. This part may be pin-strapped for 5V output, or programmed from 1.24V to 29V with the use of two external resistors.
The MIC2954 is available in two voltage tolerances, ±0.5% maximum and ±1% maximum. Both are guaranteed for junction temperatures from 40°C to +125°C.
The MIC2954 has a very low output voltage temperature coefficient and extremely good load and line regulation (0.04% typical).
|
|
|
• Battery powered equipment• Cellular telephones• Laptop, notebook, and palmtop computers• PCMCIA VCC and VPP regulation/switching• Bar code scanners• Automotive electronics• SMPS post-regulator/dc-to-dc modules• Voltage reference• High-efficiency linear power supplies
|
• High-accuracy 5V, guaranteed 250mA output• Low quiescent current• Low dropout voltage• Extremely tight load and line regulation• Very low temperature coefficient• Current and thermal limiting• Input can withstand 20V reverse battery and +60V positive transients• Error flag warns of low output voltage• Logic-controlled electronic shutdown• Output programmable from 1.24V to 29V(MIC2954-07/08)• Available in TO-220, TO-92, and surface-mount SOT-223 and SOP-8 packages
|
Input Voltage (VIN) .......................................20V to +60V
Feedback Voltage (VFB), Note 14,15 ........... 1.5V to +26V
Shutdown Input Voltage (VSHDN) .................0.3V to +30V
Error Output Voltage (VERR) ........................ 0.3V to +30V
Power Dissipation (PD), Note 4 ............... Internally Limited
Storage Temperature (TS) .......................65°C to +150°C
Lead Temperature (soldering, 5 sec.) .......................260°C
ESD, Note 3
Post a Buying Lead
Required Field 
